Introduction
Here’s the thing about edge banding: it needs to be fast, clean, and absolutely reliable. That’s exactly what we built this Homag edge bander heater lamp for. It’s a straight-up, drop-in replacement for your high-speed line. We’re talking about a halogen unit that throws concentrated heat right where you need it, instantly activating your adhesive on PVC, ABS, and PET edges. The result? A flawless, glass-smooth finish, without any ugly burn marks.
Power and Voltage: The Need for Speed
The heart of this lamp is its 2500W power, running on 400V. This isn’t just a random number. It’s what gives the lamp its lightning-fast heat-up time—hitting operating temperature in under 5 seconds. That speed is what keeps your line moving, even when you’re cruising at 18 meters per minute. But, with that kind of power, your machine’s electrical system needs to be up to the task. The 400V supply keeps the current manageable, but you’ve got to make sure your Homag machine’s contactor and wiring are built for this kind of high-amperage, continuous work.
What It’s Made Of: Quartz, Coating, and a Solid Connection
The heating element lives inside a 300mm quartz tube. Why quartz? Because it can handle the shock of turning on and off instantly without cracking, unlike regular glass. Inside, a special coating keeps the infrared output steady for the lamp’s entire life. That means you won’t get that gradual drop in heat that leads to weak bonds. And the R7s connector? It’s the standard for a reason. It gives you a secure, double-ended contact that locks the lamp in place, so it won’t rattle loose from vibration. No shifting, no connection loss, just less downtime.
Real-World Performance: Where the Rubber Meets the Road
On the shop floor, edge banding is a high-pressure job. You need heat, and you need it right now—evenly across the whole edge. This lamp runs at a steady 700°C, giving you a consistent melt flow on the glue line. That means you can say goodbye to the “orange peel” effect on glossy finishes and trust that your bond strength meets the mark. It’s a direct replacement, so you just wire it in. No messing with the socket or the machine’s footprint. Just one heads-up: this lamp runs hot. Make sure your machine’s airflow is clear. If the cooling gets blocked, it’ll shorten the lamp’s life.
The Specs, Straight Up
***Type:**Halogen Heater Lamp ***Voltage:**400V ***Power:**2500W ***Length:**300mm ***Connector:**R7s ***Application:**Homag Edge Bander Machines
What It Means for You
When you’re running at full tilt, there’s no room for compromise on surface quality. This lamp gives you the precise thermal control to match the performance of imported systems, but it costs less and comes with local support you can actually count on.